Lexmark S410 Series Printer Driver Latest

By stimulus

Lexmark S410 Series Printer Driver Install Update

For warranty returns, call This patented printer is licensed for, and designed to work with, only genuine Lexmark inkjet cartridges for the life of the patented printer.

Contents Contents Making copies Available on the Software and Documentation CD. About your printer Printer features Setting up the printer Depending on the model, your printer comes with features that will help you manage and accomplish Unpack the printer.

About your printer If necessary, replace the preinstalled language sheet with another one. Remove the preinstalled language sheet from the printer control panel. About your printer Use the paper guide adjustment lever to extend the paper guides. Close the paper feed guard. Extend the paper exit tray. Make sure the printer is on. About your printer Open the printer. Insert each ink cartridge.

Slide your finger along the ink cartridge until the cartridge clicks into place. The printhead moves to the cartridge installation position. Unpack the ink cartridges, and then remove the protective caps from the cartridges. About your printer Understanding the parts of the printer Press to print an alignment page.

The alignment page may take a while to print and will move in and out during the process. EXT port Connect additional devices telephone or answering machine to the printer and the telephone line. Use this port if you do not have a dedicated Notes: When the printer is on, press to switch to Sleep mode.

Press and hold for three seconds to turn off the printer. About your printer Using a flash drive with the printer Make sure the flash drive contains files that are supported by the printer.

For more information, see Color Switch to color mode. Insert a flash drive into the USB port. After use, return this cartridge to Lexmark for remanufacturing, refilling, or recycling. Available only on the Lexmark Web site at www.

Lexmark S models Item Ordering and replacing ink cartridges Press the release tab, and then remove the used ink cartridge or cartridges. Installing ink cartridges Remove the ink cartridge from the pack, and then remove the protective cap from the ink cartridge.

If your ink cartridge comes with a twist cap, then remove the cap. Ordering and replacing ink cartridges If you aligned the cartridges to improve print quality, then print your document again.

If print quality has not improved, then clean the printhead nozzles. Cleaning the printhead nozzles If you have not been using the printer for a long period, then you may need to clean the printhead nozzles to improve the quality of your prints. Supported operating systems Note: Information on additional operating system versions that are compatible with the printer may be The printer software requires up to MB of free disk space. Customer Support Contact customer support.

Lexmark Software Updates Download and install the latest printer software. Lexmark Online Visit the Lexmark Web site. Order Supplies Online Order ink or supplies. Printer Registration Register your printer. Copying Press the left or right arrow button to select the number of copies.

Copying From the Copy menu screen, press the up or down arrow button to scroll to the option you want to set, and then press the left or right arrow button to scroll to the setting you want. If necessary, press to make a selection. Copying Canceling copy jobs To cancel a copy job, press , and then press Scanning stops and the printer returns to the previous menu. Scanning Press the up or down arrow button to scroll to the scan option you want to set, and then press the Scanning left or right arrow button to scroll to the setting you want.

Set the color, quality, original image size, and other scan options. If necessary, press each time you make a selection. Click All Programs or Programs, and then select the printer program folder from the list. Setting up the printer to fax To connect: Setting up the printer to fax Connect the cable from the wall jack to the port of the printer. Setting up the printer to fax Connected to different wall jacks Setup 3: Connect the cable from the wall jack to the port of the printer.

Connect the line port of the DSL filter to the wall jack. Digital telephone service through a cable provider The port labeled Phone Line 2 or Fax Port is not always active. You may need to pay extra to your VoIP provider if you want to activate the second phone port. Setting up the printer to fax Scenario 5: You can use a phone splitter.

Plug the phone splitter into the Phone Line Different countries or regions have different types of telephone wall jacks. Setting up the printer to fax Notes: If the additional device telephone or answering machine has an RJ connector, then you can remove the wrap plug and connect the device to the port of the printer.

France Netherlands Switzerland Connect the cable from the wall jack to the port of the printer. If your country or region is on the list, then do not remove the wrap plug from the port of the printer. Setting up the printer to fax Connect the printer to any of the N ports.

If you hear a dial tone, then the telephone line and the wall jack are working. Make sure the printer is properly connected to the telephone line While the printer is connected to a telephone line through the port on the back of the printer, plug an analog telephone into the Setting up the printer to fax Note: In some models, entries 1—89 are for individual contacts and entries 90—99 are for fax groups. Set the number of rings Enter the number before entering the contact name and fax number of the contact.

If you set Auto Answer to On in Step 4, then do the following. Do not use the fax feature during a lightning storm.

Make sure that Auto Answer is on: From the printer control panel, navigate to: For more information, visit www. Wireless networking Follow the instructions on the printer display. If Troubleshooting does not solve your problem Click Install, and then follow the instructions on the computer screen.

Visit our Web site at http: Troubleshooting Software did not install Close the printer. This solution applies to Macintosh users only. Make sure the printer is not in Sleep mode. Unplug the power cord from the wall outlet, and then pull out the power cord from the power Printer is printing blank pages supply.

Troubleshooting In the Start Search or Run dialog, type devmgmt. Press Enter, or click OK. The printer saves an incoming fax to the printer memory before it prints the fax. If the printer runs out of ink or runs out of paper while receiving the fax, then the printer saves the fax so you can print it If it is not set to On, then press the arrow buttons to select On, and then press later. Troubleshooting Wireless network troubleshooting Printing a network setup page A network setup page lists the configuration settings of the printer, including the IP address and MAC If you are having trouble setting up your printer on a network, print a network setup page, and then see address of the printer.

Troubleshooting If you are using one of these boxes and need more information, then see the documentation that came Cannot print over wireless network with your box, or contact your internet service provider ISP. If you encountered problems while installing, or if your printer does not appear in the printers folder or as a printer option when sending a print job, then try uninstalling and reinstalling the software.

Troubleshooting If you do not know the IP address of the access point, then do the following: Write down the SSID. Troubleshooting If you see this message again after you have waited long enough for the printer and the laptop to If the printer or the laptop still does not receive a valid IP address, then there is a problem with your connect to the network, then there may be a problem with your wireless network.

In the Start Search or Run dialog, type control printers. Mac and the Mac logo are trademarks of Apple Inc. Index IP addresses 49 printhead digital telephone service 33 page does not print 45 notices 2, 54 aligning 18 DSL connection 32 printer does not respond 46 printhead access area 14 standard telephone line connection 30 printer printing blank pages 46 printhead nozzles VoIP connection 32 software did not install Also See for S series Quick reference manual - 55 pages User manual - pages.

Page of 57 Go. Check the dial tone Page 38 - Step 5: S Series Quick Reference Guide. Table of Contents Add to my manuals Add.

Lexmark S410 Series Printer Driver

Lexmark S400 Series Drivers Download

With just one click you can update the driver as well as the rest of the drivers in your system, such as:. United States - English. Lexmark S Series Driver. Drivers found in our drivers database. The release date of the drivers:

Lexmark S410 series Quick Reference Manual

Lexmark S410 Series Printer Driver

For warranty returns, call This patented printer is licensed for, and designed to work with, only genuine Lexmark inkjet cartridges for the life of the patented printer. Contents Contents Making copies Available on the Software and Documentation CD. About your printer Printer features Setting up the printer Depending on the model, your printer comes with features that will help you manage and accomplish Unpack the printer. About your printer If necessary, replace the preinstalled language sheet with another one. Remove the preinstalled language sheet from the printer control panel. About your printer Use the paper guide adjustment lever to extend the paper guides. Close the paper feed guard. Extend the paper exit tray. Make sure the printer is on.

0 thoughts on “Lexmark S410 Series Printer Driver

Leave a Reply

Your email address will not be published. Required fields are marked *